Party Popper

My company, Designer Builders, completed a party popper and checked if it worked.

First Designer Builders had to draw a design and chose Harry Potter. Designer Builders draw Harry Potter's name, his glasses, him riding on a broom, and his scarf. Designer Builders finished drawing Harry Potter on the party popper cup for the design.

Next when the design for the party popper was done we did the half tooth pick and the rubber band. The Designer Builders did the rubber band first then the half tooth pick. The Designer Builders tested the rubber band and the half tooth pick in the party popper.

Last the Designer Builders did the weight and the filling for the last bite for the party popper. For the filling we used the bom bom for the filling and the glitter stickers for the filling. After the filling we tested the party popper and saw if it worked.

I enjoyed this task because we tested our party popper. The party popper didn't work because all of the filling didn't come out. We could have finished testing the party popper to check if it worked first.

Basic Facts

  I did another basic facts and did up to 20 and did a speed demon challegne. 

I then put in my results. I did times table, My score was 100/100 and my time was 3 minutes and 49 seconds. 

 My time was 3 minutes and 49 seconds and impoved in my time.

Next time I will do this task I will practise my division and do them.  

Temperature and Length

 I measured temperature and capacity.  

I first did my measurements on capacity using large and small measuring cylinders. Then I fill up the cylinders with water. My measurements were 149 ML (149 millilitres), 63 ML (63 millilitres), 7 ML (7 millilitres), and 16 ML (16 millilitres). 

After that I did my temperature measurements. I used thermometers to check the temperatures. I filled up 2 lunch boxes hot and cold and measured the temperature. My Tempertures were 12°C (12 Celsius), and 36°C ( 36 Celsius)

I need to improve in reading thermometers because I was reading Fahrenheit instead of Celsius.

Party Popper Prototype

 My company Design Builders were making a party popper prototype.

First we thought about the parts. We also thought of the stopper. We chose paper because it better to lauch the fulling.

Second Design Builders assembled the parts of the prototype. When we assembled the party popper it stayed together and thought about some backups if this party popper bracks. 

To finish up we got all of the results for our party popper. We also wrote the current design, updated design options, and the rationale. 

I learned a lot about party poppers, how to make the party popper and the current designs. 

LI: to make a prototype for testing.

Trebuchet

A trebuchet is a medivel weapon used to knock down castles.

This is an explanation about how trebuchets work.

Table Mat

 Today I was learning facts about recycling.

First I had to find 3 keywords in the book and a video. My keywords was recycling, shredded, pieces, paper, rubbish, rubbish trucks.

Then I had to find the define for the keywords. My defines was recycling and paper.

After I had to get photos about our define.

Last I had to write 4 facts about recycling.

This is a good task about reading because learning new recycling things and time line.